Amprobe AM-270 Spécifications télécharger pdf (Page 26)

Cleaning and Storage

Periodically wipe the case with a damp cloth and mild detergent; do not use

abrasives or solvents. If the meter is not to be used for periods of longer than

60 days, remove the battery and store it separately.

Battery and Fuse Replacement

Battery use:

9V alkaline battery NEDA1604A, JIS6AM6 or IEC6LF22

Fuse:

Fuse (FS1) for µAmA current input:1A/600V, IR 10kA or better, F fuse;

Fuse (FS2) for A current input: 10A/600V, IR 100kA or better, F fuse

Battery replacement for models with battery access door:

Loosen the 2 screws from the battery access door of the case bottom. Lift the

battery access door and thus the battery compartment up. Replace the battery.

Re-fasten the screws.

Fuse replacement:

Loosen the 4 screws from the case bottom. Lift the end of the case bottom

nearest the input jacks until it unsnaps from the case top. Replace the blown

fuse(s) and/or the battery. Replace the case bottom, and ensure that all the

gaskets are properly seated and the two snaps on the case top (near the LCD

side) are engaged. Re-fasten the screws.

1 2 ... 21 22 23 24 25 26 27 28

Pas de commentaire

Amprobe AM-270 Spécifications Page 26