Amprobe TMA5 Mini-Vane-Anemometer Manuel d'utilisateur télécharger pdf (Page 14)

TROUBLE SHOOTING

1. Power on but no display

a) Make sure the time of pressing power key is > 0.2

second.

b) Check the batteries are in place with good contact

and correct polarity.

c) Replace battery or move away the battery for one

minute and re-install.

2. Display disappear

a) Replace a new battery.

b) Disable the auto power off function before power

on for long time using.

3. Error code

E02: The value is under range

E03: The value is over range

E04: The original data error results in this error

(RH, WCI, DP, WBT)

E31: Circuit or sensor damaged

4. Wind speed reading is always zero

The wind speed components or circuit is damaged.

Sent back for repair

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Pas de commentaire

Amprobe TMA5 Mini-Vane-Anemometer Manuel d'utilisateur Page 14