Amprobe ACD-14-PLUS Clamp-On-Multimeters Manuel d'utilisateur télécharger pdf (Page 14)

 Safety : Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd

Ed., UL61010-1 2nd Ed. CAT III-600 Volts AC & DC; Pollution degree : 2

EMC: Conforms to EN61326-1.

This product complies with requirements of the following European Community

Directives: 89/ 336/ EEC (Electromagnetic Compatibility) and 73/ 23/ EEC (Low Voltage)

as amended by 93/ 68/ EEC (CE Marking). However, electrical noise or intense

electromagnetic elds in the vicinity of the equipment may disturb the measurement

circuit. Measuring instruments will also respond to unwanted signals that may be

present within the measurement circuit. Users should exercise care and take appropriate

precautions to avoid misleading results when making measurements in the presence of

electronic interference.

ELECTRICAL SPECIFICATIONS Accuracy at 23 °C ± 5 °C & < 75% R.H.

DC Voltage

Range Accuracy

400.0 mV ±( 0.3% rdg + 4 digits)

4.000, 40.00, 400.0 V ±( 0.5% rdg + 3 digits)

600 V ±( 1.0% rdg + 4 digits)

NMRR: >50 dB @ 50/60Hz

CMRR: >120 dB @ DC, 50/60 Hz, Rs=1 kΩ

Input Impedance: 10 MΩ, 30 pF nominal (1000 MΩ for 400.0 mV range)

Transient protection: 6.5 kV (1.2/50 μs surge)

AC Voltage (50Hz ~ 500Hz)

Range Accuracy

4.000, 40.00, 400.0 V ±( 1.5% rdg + 5 digits)

600 V ±( 2.0% rdg + 5 digits)

CMRR: >60dB @ DC to 60 Hz, Rs=1 kΩ

Maximum Crest Factor: < 1.75 : 1 at full scale & < 3.5 : 1 at half scale limited to

fundamental and harmonics, that fall within the meter

specied AC bandwidth for non-sinusoidal waveforms

Input Impedance: 10 MΩ, 30 pF nominal

Transient protection: 6.5 kV (1.2/50μs surge)

ACD-14 Plus: Average Sensing

ACD-14 TRMS Plus: True RMS sensing - 5% to100 % of range

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 147 148

Pas de commentaire

Amprobe ACD-14-PLUS Clamp-On-Multimeters Manuel d'utilisateur Page 14